Draft summary

This document describes a test method for the determination of the fracture toughness of monolithic ceramic thin plates at room temperature by the single-edge precracked plate method or the single-edge V-notch plate method. This document is intended for use with monolithic ceramics and whisker- or particulate-reinforced ceramics which are regarded as macroscopically homogeneous. It does not include continuous-fibre-reinforced ceramics composites. This document is applicable to ceramic thin plates with a thickness of 0,2 mm to =1,0 mm. The single-edge V-notch plate method can be applied to monolithic ceramics with a grain size larger than about 1 µm. The use of this method is inappropriate for yttria tetragonal zirconia polycrystal material (Y-TZP), which consists of homogeneous fine submicron grains. The method might also be unsuitable for some other very tough or soft ceramics in which a sharp crack does not form at the root of the V-notch. This document is applicable for material development, material comparison, quality assurance, characterization, reliability and design data generation. The Scope clause is a mandatory element of the text. For rules on the drafting of the Scope, refer to the ISO/IEC Directives, Part 2:2018, Clause 14.