Drafts

This document specifies minimum requirements for ferrule-secured eye terminations for general-purpose steel wire ropes complying with iso:proj:66635ISO 2408; the ferrules are made of steel, aluminium or copper. The eye termination may be made either as a Flemish eye or a turn back loop. Prototype tests covering the type acceptance of ferrule-secured systems and routine quality control requirements for ferrule-secured eye terminations are also specified in this document.

This European Standard is applicable to Dolomitic lime used for treatment of water intended for human consumption. It describes the characteristics of magnesium oxide and specifies the requirements and the corresponding test methods for Dolomitic lime. It gives information on its use in water treatment.

This European Standard is applicable to magnesium oxide used for treatment of water intended for human consumption. It describes the characteristics of magnesium oxide and specifies the requirements and the corresponding test methods for magnesium oxide. It gives information on its use in water treatment.

This European Standard is applicable to calcium magnesium carbonate used for treatment of water intended for human consumption. It describes the characteristics of calcium magnesium carbonate and specifies the requirements and the corresponding test methods for calcium magnesium carbonate. It gives information on its use in water treatment.

This document specifies the terms and definitions, classification and a judgement method for garment silhouette. This document is applicable to the determination of the garment silhouettes for various clothing categories including T-shirts, shirts, jackets, overcoats, suits, pants, jeans, skirts, dresses etc. This document is not applicable to the judgement of garment silhouette for infants’ and children's wear or garments designed for irregular body characteristics.

This document specifies the common conditions for plug and receptacle, rack to panel with interchangeable insulators and continuous temperature rating 150 °C.

This document specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for connectors intended for use in a temperature range from - 65 °C to 150 °C continuous.

This document specifies methods of test and minimum performance requirements for personal protective clothing, designed to protect the wearer's body, except for the head, hands, and feet, that is worn during wildland firefighting and associated activities. This clothing is not intended to provide protection during fire entrapment. This document covers the general design of the garment, the minimum level of performance for the materials employed and the methods of test to determine these levels. This document is not applicable to clothing for use in situations encountered in structural firefighting (EN 469 or ISO 11999-3), rescue (ISO 18639) or where a high level of infrared radiation is expected (ISO 15538 or EN 1486), nor does this document cover clothing to protect against chemical, biological, electrical or radiation hazards. This document does not provide protection against high mechanical risks such as for protection when using chain saws.

This document specifies methods of test and minimum performance requirements for personal protective clothing, designed to protect the wearer’s body, except for the head, hands, and feet, that is worn during wildland firefighting and associated activities. This clothing is not intended to provide protection during fire entrapment. This document covers the general design of the garment, the minimum level of performance for the materials employed and the methods of test to determine these levels. This document is not applicable to clothing for use in situations encountered in structural firefighting (EN 469 or ISO 11999-3), rescue (ISO 18639) or where a high level of infrared radiation is expected (ISO 15538 or EN 1486), nor does this document cover clothing to protect against chemical, biological, electrical or radiation hazards. This document does not provide protection against high mechanical risks such as for protection when using chain saws.

This standard specifies a method to measure, compute and present specification parameters and characterization data for cameras and image sensors used for machine vision applications. This standard is intended to provide a concise definition and clear description of the measurement process and to benefit the vision industry by providing fast, comprehensive and consistent access to specification information for cameras and sensors. It will be particularly beneficial for those who wish to compare cameras or who wish to calculate system performance based on the performance specifications of an image sensor or a camera.

This document provides guidance on the planning of smart city ICT infrastructure. This document gives general principles, basic processes for the planning of smart city ICT infrastructure. It focuses on the procedure, suggestions, good practices and basic interoperability demands of the planning activities including demand analysis, overall architecture design, and implementation roadmap planning. It guides the stakeholders in implementing the city level ICT infrastructure planning.

This document defines an ontology for service level concepts for public health emergencies using terms specified in ISO/IEC 5087-1 and 5087-2. Note Service level concepts are used to represent data that is shared across multiple services and stakeholders in the city. Service level concepts are distinguished by their data being read but not updated by multiple city services and stakeholders.

This document defines concepts, measures and requirements for assessment and treatment of bias in AI systems. This includes bias unwanted by the AI Provider and AI Deployer according to their specification of the AI system, in the context of the AI Act. This encompasses consideration of data bias including any data used to build or assess the AI system, but also system or model bias that can result from algorithmic factors, such as algorithm design choices.

This document specifies a set of tests and procedures designed to indicate whether encoders or decoders meet the normative requirements specified in iso:proj:91174ISO/IEC DIS 23090-38. The reference software includes both encoder and decoder functionality.

This document provides guidelines for sustainably improving the energy performance of historic buildings, e.g. historically, architecturally or culturally valuable buildings, while respecting their significance. The use of this document is not limited to buildings with statutory heritage designation, it applies to historic buildings of all types and ages. This document presents a normative working procedure for selecting measures to improve energy performance, based on an investigation, analysis and documentation of the building including its significance. The procedure assesses the impact of those measures in relation to preserving the character-defining elements of the building.

This document describes a test method for the determination of snagging resistance of a fabric using pins fitted in a rotating chamber. This test method is applicable to knitted and to woven fabrics.

This document defines subsets of the syntax specified in Recommendation ITU-T T.841.1 | ISO/IEC 26112-1 as profiles. It also defines lower bounds on the throughput in both the decoded and encoded domains via levels that a conforming decoder implementation shall support.

This document contains the reference software of the ITU-T T.841 | ISO/IEC 26112 series. It provides guidance for implementation of JPEG XE and as a reference for conformance testing.

This document specifies the minimum common safety and performance requirements of hand-held branchpipes used by fire and rescue service equipment. This document defines: - test methods; - classification and designation; - instructions for use and maintenance; marking. NOTE The additional specific requirements applicable to hand-held branchpipes are defined in EN 15182-2:— (combination branchpipes PN 16), EN 15182-3:— (Smooth bore and/or one fixed spray jet angle branchpipes PN 16) and EN 15182-4:— (High pressure branchpipes PN 40). This document is not applicable to: - branchpipes covered by the EN 671 series; - foam branchpipes covered by EN 16712-3; - CAFS branchpipes; - powder branchpipes; - branchpipes with a maximum working pressure above 40 bar.

In addition to common the requirements given in EN 15182 1, this document specifies the specific safety and performance requirements and the corresponding test methods, applicable to hand-held high pressure branchpipes (nozzles) with a nominal pressure of 40 bar (4,0 MPa) PN 40, with a maximum flow rate up to 250 l/min at a reference pressure of 6 bar (0,6 MPa). These branchpipes are used for example for quick attack lines, building fires, forest fires, etc.